Categories
IWC

M+ Factory Replica IWC Spitfire IW329701 Titanium Watch

It has been a long time not to see new replica watches from IWC, there were all about Submariner, Datejust, Daytona and Audemars Piguet in the past several months, I liked IWC very much before and considered it is my dream watch that I must get one Portuguese Chrono watch in my life. Today, I still want to get one but not enough money still, and I do not think IWC is beautiful now even Portuguese Chrono is one of the best-looking watch to match your business suit. In recent months, I have seen a lot of homage watches made in China and in other countries, they are so nice and have good quality, many people are buying them, so I think building my watch collection is not an easy job, facing too many options, and there are a lot of good quality homage watches sold at cheap prices, in order not to waste your money, you need to do a lot of search on the internet and watch forums. Back to our topic today, the Spitfire, it is the latest replica IWC watch in our market, made by M+ Factory, this is not a very famous factory, they only made some IWC Mark series replica watches, the quality is good, not sure why they do not make other IWC models, and few people chose IWC watches from M+, unless they can not find the wanted models from other manufacturers like ZF and V7F.

The new IWC Spitfire replica watch is made with solid Titanium material, the case is 43mm in diameter and is measured to be 14.4mm in thickness. The Titanium case has a sand-finish that feels extremely good, the fine sand finish is on the case, bezel, lugs and crown, the case back is solid with an airplane on the center, the big crown has a delicate IWC logo relief on the sunken center. The case is completely built to have the same shape as real IWC Big Pilot, it is a little thick because of the movement inside, which is cloned to genuine IWC Calibre but modified on the basis of a Chinese movement. The best movement used in IWC Big Pilot replica watches is from ZF, and if you need replica IWC watch with real Swiss movement, I suggest you buy a replica IWC Mark series watch from V7, which can be equipped with a real Swiss ETA. I am sure ZF will make this replica watch if M+ sells it well, but do not know when. The blue dial is under a sapphire crystal that features anti-reflective coating, which helps you to read the dial more clearly under the sun light.

The dial is black, does it look like blue, right? Actually it is black. Lume material that looks a bit yellowish is applied on hour markers, hour hand and minute hand. Those numeral minute markers in white do not being applied with lume material, some homage watches of IWC Big Pilot made in China use the lume on all elements of the dial, the lume light too strong. The hour markers inside the circle have a light color, not that shiny white on the minute markers, with so many digital numbers, the dial readability still not affected. The band is replicated according to the band of genuine, but if you do not like this type of band, you can ask your dealer to change the band, there are stores in the market that can customize leather bands, won’t cost too much.

Replica IWC Spitfire IW329701
Replica IWC Spitfire IW329701 Black
M+ Factory Replica IWC Spitfire IW329701
IWC Spitfire IW329701 Titanium Case
IWC Spitfire IW329701 Crown
Replica IWC Spitfire IW329701 Brown Leather Band
IWC Spitfire IW329701 Case Back
IWC Spitfire IW329701 Buckle
IWC Spitfire IW329701 Band
Categories
Rolex

EW Factory Replica Rolex Oyster Perpetual Bubble Dial 36mm and 41mm

The new Oyster Perpetual with bubble dial is in hot discussion in various forums, a lot of people are interested in this replica, there are three sizes for this watch, 31mm, 36mm and 41mm, some watch factories are making the replicas, the earlest one is OW factory, I did not get the bubble Oyster Perpetual from OW before, but I saw many negative reviews about this factory on the internet. The second factory that makes the replica bubble Oyster Perpetual is KR factory, it is better than OWF version but a lot of people said the lug shape on KRF is wrong. The third factory to make this replica watch is EW, actually I seldom recommend watches made by EW, but my supplier said EW has good watches with good prices, they usually do not sell their watches at high prices, and there are a lot of positive reviews about EWF products on the forums, especially the 36mm Oyster Perpetual Tiffany Dial, it is said to the best version in our market, then how about the new Oyster Perpetual Bubble Dial from EW factory? I think it is currently the best one.

The 36mm and 41mm are both equipped with clone 3230 movement, which has a long power reserve up to 72 hours, some clients bought their OPs and tested the power reserve, it is correct. For the 36mm Oyster Perpetual made in the market, the first factory I recommend is EW, not only because of its better movement, but also the price is very reasonable. I do not know the 41mm, on 36mm Oyster Perpetual bubble, EW factory makes correct case and lug shape, OW factory completely makes the case shape wrong, about KRF, the lug shape is also not correct, but the three factories all make the dial color wrong, even EW’s dial color is closer to genuine. I will open a post in future to do a pictures comparison between EWF and KRF. Well, the pictures I share here are 36mm and 41mm Oyster Perpetual made by EWF, how about the 31mm, do you know what movement used in the 31mm OP?

Replica Rolex Oyster Perpetual Bubble 36
Replica Rolex Oyster Perpetual Bubble 41
Categories
Rolex

Two middle quality replica watches you may like

Sometimes I was hesitating to tell whether the replica they are asking is a super clone or not, because they usually won’t buy it after being told it is not a super clone, the replica watch is not a super clone, not mean it is not in good quality, so they just missed a good replica watch. Not all replica watches in our market are super clones, even from these famous factories such as Clean, KV, GM and VS. For example, the GMT-Master II Batgirl and Pepsi from Clean can not be called super clones if they are not equipped with the latest Dandong 3285 movement, some Seamaster watches published by VS can also not be called super clones if not with the in-house super clone movements, but these are good replicas, the ones that closest to the super clone levels. Well, I will still stick to the principle of telling you the replica if it is the highest quality one in our market, you make the decision by yourself. Today, I will share two middle quality replica watches I like, one is the latest Blancpain replica, the other is a vintage Rolex Explorer.

BP Replica Rolex Vintage Explorer

About the vintage Rolex Explorer, actually I introduced a similar one on my blog before, please check this post, https://www.wristwatchspot.com/2021/12/20/a-vintage-rolex-explorer/. Both are made by BP factory, the same case size and same movement inside, the only difference lies in the color of the markers on the dial, this one has a yellow hour markers. About vintage Rolex watches, many people are interested in, but there are not too many good replicas of vintage Rolex in our market, I think only BP and JK two factories make good quality ones, BP has the most complete collection including Submariner, Explorer and GMT-Master, JK has Daytona Paul Newman. Vintage Rolex replicas are not super clones, but they have more fun to play.

Blancpain Ait Command Replica
Blancpain Ait Command Blue Watch
Blancpain Ait Command Crown
Blancpain Ait Command Movement

The second watch is a new replica, it is Blancpain Ait Command, made by IT factory, I never heard of this factory before, perhaps it is just a small store in the market street. By the way, this replica does not have the same good case finish as the other watches I introduced on my blog. I did not see any dealers introduced this replica on their website or wechat moment, I also asked the supplier in the factory, he told me this is not a super clone, even not a middle quality one. Let us see if ZF will make it in this year, this Blancpain watch really looks nice. The replica is driven by a Dandong 7750 movement, it has a working chronograph function, the stopped central second hand will move if you push the button at 2 o’clock. By the way, the watch has a very thick case because IT adds several plates on base of the original Dandong movement.

Categories
Bell Ross

BR Factory Replica Bell Ross BR03-93 GMT Watch

Replica Bell Ross BR03-93 GMT

BR, I do not know this factory, perhaps it is just a store in our market that only sells good quality Bell Ross replica watches. Have you ever come to our watch market to find replica watches? Too many buildings in Zhanxi with a lot of stores in every floor, to buy the best quality replica watches, you need to find the right building and right sales person, not all of them can get high end replica watches. Some stores in these buildings sell replica watches from various Swiss brands, some only sell the replica watches of a specific brand, if you want the best ones, I do not suggest you search on the first floor, they are all cheap ones, and some are overpriced. About Bell Ross, there must be one store that can offer high end replicas, maybe it is BR we usually call. About Bell Ross replica watches, they are not as popular as other brands such as Rolex, Panerai and Omega, there are certainly high quality ones in our market, and their designs sometime really amazing, I do not know why their hotness is still low.

Replica Bell Ross BR03-93 Black Red
Replica Bell Ross BR03-93 BR Factory

Do you like this Bell Ross BR03-93 replica watch? It is an old model that was published to the market in 2021, I just found this replica watch and think it is a very beautiful timepiece, the attractive design is its bi-color black and red bezel, and the replica watch is sold at a very affordable price, I think many people who like square automatic watches will be interested in this Bell Ross. Unfortunately the bezel is not ceramic made, or I will consider to buy one.

Bell Ross BR03-93 GMT Crown
Bell Ross BR03-93 GMT Case

The case is 42mmx42mm and is measured to be 11mm in thickness, which is acceptable to most people, such thickness is very comfortable for an automatic watch, I do not have a square-shaped mechanical watch, considering its water resistance, I think this is also one reason for a lot of people not to choose a square Bell Ross, but it won’t be a problem if you wear it when washing your hands and swimming in the pool. Although the case back is not screwed down but fixed by screws, there is gasket to guarantee a good water resistance, and do not open the case back by yourself. The case has a very nice finish, the sides are polished fine with round smooth four corners. The screw in each corner has a polished face and is aligned perfectly with the diagonal screw. The bi-color bezel has black and red, one half black and one half red, divided at the middle of numbers “6” and “18”.

Bell Ross BR03-93 GMT Case Back
Bell Ross BR03-93 GMT Buckle

The black dial is highly readable, there are big numbers 3, 6, 9 and 12 in silver, the sword-shaped hour hand and minute hand are applied with white Swiss lume material, so are those bar-shaped hour markers, they will emit a strong blue lume light in dark conditions, there is an extra inner bezel to display 60 minutes, the GMT hand with a red arrow tip is pointing at current time of the second time zone on the bezel. The round date window is noticable with white font.

Bell Ross BR03-93 GMT with Screws

The replica is equipped with an Asia clone ETA 2836-2 automatic movement and can be changed to the red black leather strap in the picture, the factory will send you screw driver.

Bell Ross BR03-93 GMT with Extra Band